Power Tools & Accesories

Systainer SYS3 M 112

without tool insert proven systainer storage system

Circle Cutter KS-PS 420/F

The optional circle cutter for the CARVEX jigsaws can be used to cut circles up to nearly ten feet in diameter. It attaches to the optional Guide Rail base (497303) or can be purchased as a set (497443) that includes the base and circle cutter. ...

Edge trimming cutter HW D 19/16 S8 OFK 700

for flush trimming of edges carbide blades for edges up to 15 mm in thickness

Anchor Bolt SV-AB D14/32

32 Anchor Bolts for corner connections, including 64 Half-Shells Break through the limits of shop-built pieces and on-site construction with the use of knock-down hardware. Create, build, and finish full-sized constructed pieces, then quickly...

PLASTIC BASE PL LA-OF 1400

Accessory base for use with small diameter edge-forming bits. Provides stability on outside corners by extending the base to the inside near the bit. Allows for faster and easier corner routing Enables more precise corner routing Avoids risk of base...

Angle arm WA-OF

Used with copier scanning set to copy workpieces. Used with edging plate for trimming edges flush. Copier set and edging plate sold separately. Expand functionality of OF 1010 and OF 1400 routers Use OF 1010 or OF 1400 routers instead of dedicated...

Collet SZ-D 12,7/OF1400-OF2200

Faster and easier bit changes with one wrench. Works on the Festool OF2200 and OF2000 (24mm Wrench) Dramatically reduces bit slipping Maintain center line and higher precission cuts over the life of the collet For router shaft dia. 1/2“ dustproof...

Collet SZ-D 6,35/OF1400-OF2200

Faster and easier bit changes with one wrench. Works on the Festool OF2200 and OF2000 (24mm Wrench) Dramatically reduces bit slipping Maintain center line and higher precission cuts over the life of the collet For router shaft dia. 1/4“ dustproof...

Drill bit with depth stop BTA HW D 5 CE

Centrotec 5mm drill bit with depth stop. Replacement bit available (491794). Save money by replacing just the bit and not the entire assembly Save time changing between drill and screw bits with the quick-change Centrotec System Reduce fatigue with...