Product Description
You will be contacted with a shipping quote
The SawStop® 10" Professional Cabinet Saw provides superior performance to meet the demands of discerning craftsmen and woodworkers. With SawStop’s legendary safety system, ground breaking dust collection and flawless fit and finish it’s ready to help you get the job done.
Now the Professional Cabinet Saw is available in a 1.75HP motor configuration. Plug in anywhere with 110 volt convenience!
| SPECIFICATIONS: | |
| Motor: (all 60Hz, TEFC): | 1.75 or 3 hp available |
| Cabinet footprint: | 19 3/8″ w x 19 3/8″ d |
| Cast iron table: | 20″ w x 27″ d |
| Cast iron table (w/ extension wings): | 44″ w x 27″ d |
| Extension wings: | 12″ w x 27″ d each |
| Extension table 30 in rails: | 12" w x 27" d |
| Extension table 36 in rails: | 23 3/4″ w x 27″ d |
| Extension table 52 in rails: | 40 1/8″ w x 27″ d |
| Weights - table saw only: | 317 lb (1.75 hp), 335 lbs (3 hp) |
| Weights - w/ 30 in fence systems: | 367 lb (1.75 hp), 380 lbs (3 hp) |
| Weights - w/ 36 in fence systems: | 408 lb (1.75 hp), 426 lbs (3 hp) |
| Weights - w/ 52 in fence systems: | 431 lb (1.75 hp), 449 lbs (3 hp) |
| Weights - (optional cast iron wings): | N/A |
| Shipping weight (approx.): | 390 lb (table saw only) |
| Blade: | 40-tooth, 5/8″ arbor |
| Blade diameter: | 10″ |
| Blade tilt: | Left |
| Blade kerf: | 0.118″ (3mm) |
| Blade plate thickness: | 0.078″ (2mm) |
| Max. depth of cut, blade at 0º: | 3 1/8″ |
| Max. depth of cut, blade at 45º: | 2 1/4″ |
| Max. rip, right of blade - 30 in: | 30″ (w/ 30″ rails) |
| Max. rip, right of blade - 36 in: | 36″ (w/ 36″ rails) |
| Max. rip, right of blade - 52 in: | 52″ (w/ 52″ rails) |
| Max. rip, left of blade: | 12" |
| Max. rip, left of blade (options): | N/A |
| Dado diameter: | 8″ (requires 8R2 brake, dado insert) |
| Dado max. width: | 13/16″ |
| Arbor diameter at blade: | 5/8″ |
| Main bearing size: | 62mm OD x 30mm ID |
| Second bearing size: | 52mm OD x 25mm ID |
| Table in front of blade (max. elevation): | 10 1/4″ |
| Table behind blade (max. elevation): | 7 1/2″ |
| Arbor Runout: | 0.001″ Maximum allowable runout |
| Table flatness measured diagonally: | 0.010″ Maximum gap |
| Blade alignment with miter slot: | 0.010″ Maximum displacement |
| Deviation of miter gauge indexing stops from actual: | ±0.25º |
| Alignment between splitter and blade: | 0.010″ Maximum difference |
| Miter slots T-shaped: | 3/4″ at top, 1″ at bottom, 3/8″ deep |
| Miter slots center: | 11 1/8″ center-to-center |
| Miter slots info: | 5 1/2″ (arbor flange to center of right slot) |
| Dust collection port diameter: | 4″ |
| Riving knife / splitter thickness: | 0.090" (2.3 mm) |
| Blade guard (dust collection): | polycarbonate, extends 1 3/16" right of blade (3HP) |
| Blade guard (micro guard): | polycarbonate, extends 1″ right of blade (1.75HP) |
| Insert: | zero clr., phenolic core, melamine surfaces |
| Hand wheels: | 7″ diameter, cast iron w/ chrome handle |
| Belts: | 2 V-ribbed belts – arbor b. static dissipative |
| Overall saw dimensions: | 44″ w x 29 3/4″ d x 34″ h |
| Overall saw dimensions 30 in: | 61 3/4″ w x 31 1/8″ d x 34″h |
| Overall saw dimensions 36 in: | 69 1/8″ w x 33″ d x 34″ h |
| Overall saw dimensions 52 in: | 85 1/4″ w x 33″ d x 34″ h |
| Motor configuration 1:PCS175: | 1.75 hp, 110v, 14 A |
| Motor configuration 2: | (user config. to 220v w/optional kit) |
| Motor configuration 3: | PCS31230: 3 hp, 1 phase, 230 V, 13 A |
