Product Description
The CXS Compact cordless drill is by far the smallest, extension of Festool’s Li-Ion drill platform. Featuring the FastFix chuck system, the CXS can be used with the Centrotec chuck, keyless chuck, or an optional right angle attachment that allows you to access even the tightest spaces. As you would expect, the CXS features exceptional ergonomics, with a battery design that removes the bulk from the handle, ensuring maximum comfort over extended use. Weighing in just under 2 pounds with the Centrotec chuck attached, the CXS will not leave you feeling fatigued even after all day use. The CXS offers exceptional battery life and an ultra-low recharge time, fully recharging in just 45 minutes. The drill comes with two 10.8v 2.6Ah Lithium Ion batteries to keep you drilling and driving instead of waiting for a battery to recharge. The drill, charger and both batteries are covered by Festool's comprehensive 3-year warranty.
To buy the CXS with a FastFix Right Angle Chuck (plus everything listed above), see CXS Set.
- 3 tools in 1, FastFix enables the use of the Centrotec chuck, a keyless chuck and optional right angle attachment for gaining access to tight spaces
- Tough inside and out, the CXS features sophisticated electronics that protect the tool and batteries from over current, under voltage, and overheating.
- An ultra-compact design weighing in at less than 2lbs means maximum comfort during extended use.
- Extremely long battery life and recharge time of only 45 minutes
Includes:
- (2) Batteries
- (1) Centrotec Chuck
- (1) Charger
- (1) Keyless Chuck
- (1) T-Loc Systainer 1
Features:
- Electronic
- Speed control for adjusting to all types of materials.
- Torque shut-off
- Intelligent technology ensures the optimum screwdriving force for every material.
- FastFix
- Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
- Lithium-ion battery
- Fitted with high-performance lithium ion battery pack.
Specifications
| Battery Voltage | 10.8v, 2.6Ah |
| Charge Time | -30 mins. to 100% |
| Chuck Range | 1/32” – 3/8” (1 – 10 mm) |
| Keyless Chuck Capacity | 1/32" - 3/8" |
| Torque setting 1st gear | 2.7 in-lb (0.3 Nm) - 30.1 in-lb (3.4 Nm) |
| Drilling diameter, wood/steel | 15/32” (12 mm)/5/16” (8 mm) |
| Max. torque, wood/steel | 88.5 in-lb (10 Nm)/141.6 in-lb (16 Nm) |
| Motor Type | DC |
| RPM - Setting 1 | 0-400 |
| RPM - Setting 2 | 0-1,200 |
| Systainer | SYS 1 T-LOC |
| Weight with Li-ion | 1.98 lbs (0.9 kg) |
